Skip to main content

V1.0

Major VersionM

by Dozuki System

Introduction

This guide demonstrates how to tape a package for shipping.

  1. With your thumb and pointer finger grab the tape close to the blade on the dispenser.
    • With your thumb and pointer finger grab the tape close to the blade on the dispenser.

  2. Pull the tape away from the dispenser using your thumb and pointer finger.
    • Pull the tape away from the dispenser using your thumb and pointer finger.

    • Reminder: Keep the tape straight and taut while pulling it out of the dispenser.

  3. Using your thumb and pointer finger, grab the tape near the blade and pull downwards.
    • Using your thumb and pointer finger, grab the tape near the blade and pull downwards.

    • This will remove the strip of the tape from the dispenser for your use.

    • Reminder: Keep the tape straight, making sure the sticky side doesn't touch anything.

  4. Hold both ends of the tape, aligning the middle of the strip of the tape with the middle of the long, wide part of the box.
    • Hold both ends of the tape, aligning the middle of the strip of the tape with the middle of the long, wide part of the box.

    • Place the tape so it will go across the flaps that open and close on the box.

  5. Wrap the remaining tape around the sides that open and close.
    • Wrap the remaining tape around the sides that open and close.

  6. Continue wrapping this tape onto the back of the box.
    • Continue wrapping this tape onto the back of the box.

  7. Your box is now properly taped up!
    • Your box is now properly taped up!

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dozuki System

Member since: 09/24/2009

1 Reputation

134 Guides authored

0 Comments

Add Comment